Search results

Hey Tony, Thanks for the tips. Sitting there thinking about it I went out and got a decent battery and chucked it in. She fired straight up but whilst it was out I went over the ground points and cleaned them up too so thanks all. I hope this helps a few of you if the problem pops up in the...

Well, I had a good go at it tonight and she's still ticking away without a hint of cranking over. Tony, I'll try your suggestion. Could I also override with a jump start attempt? :popcorn1:

Update. I'll clean up all the connectors linked to the battery and starter this evening. The battery has been given a good charge with a quality battery maintenance system to strike that issue off the list.

Hey folks, I've got a problem that I need a little help to shed some light on and I'd thought I'd bring it here as I can't find a similar issue and it would be good to add to the database. Essentially my engine won't crank. The idiot lights come on when I turn the key and turn off when I...

Welcome to the forum! Man, with what I see Swedes do to B230F's I'd love to see some photos!

Welcome mate!

Can't you turn the snorkel intake around in the case of heavy downpour or extreme dust?

Nice work Hugh!

I'm one of those arseholes that sit at the pump for 20 minutes and check everything that I can. I've found 10 minutes reflects the same levels as when cold.

Bump. After having the bottle sit in my shed for three months I finally used it and noticed an improvement in throttle response even just pulling away from the station. My first though was, "Bullshit, I must have filled up somewhere els...no, same station. I think this stuff works." Now the...

Mine sits just a little over the top of the high notch below the kink and it's been that way for the last 1500km. If yours is below the lowest mark, well, you need to top it up. Was the engine warm when you checked it? How soon after shutting off the engine did you check your level?

:) Must be done! That looks like an awesome and fun trip.

Just photography which I have a 25 mil liability cover for. I don't ever want to get into a legal brooha with a pissed off bride but it's there in case I do.

Good work!

One freak incident I guess as I always apply grease and recheck tension.

Hey folks, Just noticed with the steel wheels on now that even after checking them after installation all the nuts were loose on my front wheels. Is there a different nut that I need to use on Steel Wheels instead of the ones that came with the Alloy rims? Oh and stubb specs are 12mm x 1.25...

I've got a canopy but have drilled, sanded, touched up with primer then added silicone where I've installed some eyelets for securing loads. Just double check where you drill so you don't drill through a line.

Of all the lifts above 3" they all seem to come with extended shackles so does this mean you're all running entirely illegal lift kits? :P

Measure twice, cut once. ;)

Man...you tease! Once, I went once and loved it.