2012 D40 Navara Trip computer not working properly

[j.zuvela]

i have 2012 st d40 and my trip and fuel computer isnt working, it will only scroll between a and b trips and no longer comes up with my average fuel consumption or km's left in the tank or any of the other options.

It happened about a week after i changed to the 265/70/17 tyres.

Does anyone know whether its because of the tyre change or is it a fuse problem?

Thanks,
Justin

 

[Malicious]

Check the meter fuse, pull it and wait a while then put it back in.
It's in the fuse box in the glove box 3rd one down on left hand side

 

[Old.Tony]

A change of tyre size won't be detected by the computer, which measures road speed based on the number of rotations of the ABS sensors in all 4 wheels (best average from the 4 inputs). You could put tractor tyres on it and it'll just think you're going slower.

I'd do a reset and see what that brings. Failing that, I'd be on Mr Nissan's doorstep (well, my dealer's anyway).

 

[j.zuvela]

Thank you for the replies guys. Very much appreciated

 

[j.zuvela]

Looks like im going to nissan. This will be a joy

 

[Fgk228]

Just had the same problem after the battery was disconnected. I just pressed the i button on the steering wheel and it cycled through to dte avg fuel etc. motor was off.