BigTrev
Member
I asked the question the other day on how to get the radio out of a Spain build 2012 st, I searched the threads and can't really come up with anything if someone could shed some light for me it would be greatly appreciated thanks.
2012 d40 radio install
- Thread starter BigTrev
- Start date
Help Support Nissan Navara Forum:
remove cup holders by lifting up.
Then you can lift piece around the gear stick.
Next place hands on top or sides of fascia around radio and pull firmly, it pops out with a bit of effort. Then unclip the wire harnesses to aircon etc.
You now can access the radio and replace it etc.
There have been other posts about various replacements for the radio.
This applies to my 2012 spain built ST.
Then you can lift piece around the gear stick.
Next place hands on top or sides of fascia around radio and pull firmly, it pops out with a bit of effort. Then unclip the wire harnesses to aircon etc.
You now can access the radio and replace it etc.
There have been other posts about various replacements for the radio.
This applies to my 2012 spain built ST.
Hey bud,
check this vid out. I did this today to my 2012 d40. works a treat
http://www.youtube.com/watch?v=tGIgsji8toQ
check this vid out. I did this today to my 2012 d40. works a treat
http://www.youtube.com/watch?v=tGIgsji8toQ
Hey bud,
check this vid out. I did this today to my 2012 d40. works a treat
http://www.youtube.com/watch?v=tGIgsji8toQ
Just watched a bit of your vid . That's the correct way to do it on the 12 nav . The guy who did my install did it like that . No need to remove cup holders , it all mostly pops off if you are carefull.
