D22 snorkels.. Tjm airtec/ genuine nissan snorkel vs safari. Plus questions

[Joshp82]

this one here fots the dual battery models
*http://www.ebay.com.au/itm/Nissan-Navara-D22-GENUINE-Snorkel-Part-NIA6575-VM000AU-/290661143068

in the discription it say qty:2 wonder how we would go at getting 2 delivered? if its in the description they are supposed to supply exactly whats described.

 

[308bever]

is it an 87 mm hole saw for the TJM snorkels too?

 

[308bever]

did people screw into the sheetmetal? file the squares for the plastic nutserts? or rivet the snorkel pipe support to the A pillar? i used a 90mm hole saw carefully and deburred after, very tidy job.

 

[bods]

I drilled pilot holes and used silicon just with the screws straight into the sheet metal on mine. Has been holding on for a few years now with no problems haha

 

[308bever]

i ended up filing some 7mm square holes and doing it properly, it took me about 7 hours from start to finish, but, might have been easier with slim forearms, i`m very happy with the job, QUESTION THOUGH has anybody had a windscreen fitted after fitting a snorkel? coz for the life of me i do not see how you undo those phillips head screws that hold the upper bracket or the windshield trim screws while the snorkel is there!