d4o spotlight wiring diagram

[todd]

hey guys, Im new to the site I recenty purchased a 2009 d40 navara dual cab and need some help wiring up my new rallye 4000's due to the negative switching and each side of the head lighs have all different colored wires could somebody make this simple for me it would be much appreciated
thanks
Todd

 

[Dave]

Welcome to the forum mate.

Do you have a test light or a multimetre ?

Unplug the headlight harness off the back of the globe, put the aligator clip on the test light or negative multimetre lead on the body. Get someone to help you with the lights, touch the pins and see which wire causes the test light to light up only when highbeam is activated.

Good luck.

Dave.

 

[Jason]

Hi Todd, welcome to the forum.

 

[Leprechaun]

Blue wire is the trigger for High Beam, I connected mine behind the battery then ran the switch wire through the bonnet release grommit.
Hope this helps.

 

[TheOx]

On my 2009 tai D40 the hi beam wire was green. Pulled the plug out the back of the lights and using a multi mete, tested each wire while the high beam is on.