J justAL Member Joined Aug 9, 2010 Messages 180 Reaction score 0 Jun 20, 2012 #1 Hey folks, What should the measurements be from the top and bottom of the suspension arm to each bump stop? Cheers
Hey folks, What should the measurements be from the top and bottom of the suspension arm to each bump stop? Cheers
joshman Member Joined Nov 21, 2010 Messages 1,592 Reaction score 0 Location Happy-Rock, QLD Jun 20, 2012 #2 Dunno what the stock height should be, but you need a minimum of 10mm on the top bump stop.
fourocker Member Joined Feb 18, 2012 Messages 503 Reaction score 1 Location Blue Mountains Jun 20, 2012 #3 Yes 10mm-15mm gap to the top stop is the go, I have 15mm gap but have put lower profile stops in so in reality it's about 10mm.
Yes 10mm-15mm gap to the top stop is the go, I have 15mm gap but have put lower profile stops in so in reality it's about 10mm.
G gazza414 Member Joined Aug 8, 2011 Messages 858 Reaction score 10 Location NSW Jun 20, 2012 #4 The ride height on mine is 715mm---much more accurate way of determining as the dimension is far more tolerant
The ride height on mine is 715mm---much more accurate way of determining as the dimension is far more tolerant
J justAL Member Joined Aug 9, 2010 Messages 180 Reaction score 0 Jun 21, 2012 #5 10-15mm on the top stop (Compression?) then. Thanks guys. --adjustment-- That would be droop. Smokin' pot folks, smokin' pot. Last edited: Jun 25, 2012
10-15mm on the top stop (Compression?) then. Thanks guys. --adjustment-- That would be droop. Smokin' pot folks, smokin' pot.
