Qd32 into d21

[Prickle65]

Hi all new member here. Could someone help me here I'm fitting a qd 32 into a d21. can I still use the thicker flywheel from the 32 or will I have problems with the clutch or do I have to use the thinner flywheel off the td27 engine I'm replacing. Thanks

 

[Prickle65]

Pulled the motor back out today didn't like how the clutch fork felt. Took some measurements and the pressure plate is pressing on the throw out bearing so put the td27 flywheel back on and put motor back in and all is good now