RLI
Member
Boost gauge install on 2006 Spanish built STX D40 6spd manual!
G, day folks,
The following is a farken step by step, photo instruction for installing a a farken boost gauge hose to the boost sensor which is mounted on the farken driver’s side front of the intercooler. I farken meant to have posted this up last year when I fitted a boost gauge to my then farken D40. Enjoy!
1. Pop the bonnet and undo black plastic clips on top of the grille with a flat bladed screw driver. See photo
2. Undo plastic clips on the bottom of the grille. See photo
3. With a 12mm spanner undo top two bolts that hold intercooler into place, note passenger side bolt also secures the bonnet safety strap. See photo
4. Undo boost sensor connection from sensor. See photo
5. Be-careful and gently wedge the intercooler forward so you can access the boost sensor. See photo
Part 1
Regards
RLI