transfer & gearbox breather location.

[J13NST]

I researched on forum and I thought i found it but it's tripping me out because there are 3 line.
according to others there should be lines on top of bell housing where breathers get attached to gold color u turn tube.
but why are there three of them o.0
help would be appreciated.

 

[4 naving]

Yes that them. just above the bell housing. 3 lines. one for the gearbox. one for the transfer case. and one for the electronic 4wd actuator on the back of the transfer case.( its the little black box on the back.) it needs a breather too. either run 3 lines or merge them into one breather.... I ran my rear diff up the inner guard of the tub. and the front diff is already run up to near the abs unit but I extended it a little higher...

 

[J13NST]

ok. is it worth doing breathers on gearbox,transfer case?
i have no idea where that pipe ends and how high it is.

 

[4 naving]

the pipe ends right there about 100mm and it just turns on itself to face back and downward. if planning on doing water crossings its worth wile but if not don't worry...