Recent content by Hooker67

please help I have installed a snorkel myself last night and its great allowing heaps more air flow into the engine. But do i need to seal from the snorkel to the guard with silicon to stop dust or small rocks getting stuck in between and rubbing though the paint and creating rust m using my...

I have had the same problem for about 6 month and it only when its under load like when going up a hill and i want to overtake it vibrates very bad. I thought it was just because i have changed the the cluch and removed the mass flywheel. Please let me know what you do to fix the problem as i...

Its a 50mm lift with spacers. I have new UPC coming from the US as the UPC are sitting on the Sping Boot.

Don't think i can last till next year

ONLOCK Have you got there contact details as I would like to chase up Monster Rides as the web page is down for maintenance Thanks

I have already sent an email just waiting for a reply. Might try again tomorrow as the PRg look the best. ONLOCK what are you running for your 4'' lift

PLEAE HELP Need help on UCA as i have installed 50mm lift with a 50mm spacer and the UCA sit on the coil boot. I know i will need a new UCA but will this fix the problem or will they just have the bumpstops. I have installed new LCA bushes so camber adjustment is fine but the ride is s#*t...

Grate place for All 4x4 Suspension and Parts Big thanks to John from Zordos 4WD Suspension for supplying and installing my D40 lift kit and new lower arm camber adjustment bushes. John fitted it last Saturday, with the suspension kit install was only going to take about 3 to 4 hours but when it...

Has any had a new D40 STX 2.5lt priced as I would like to see the difference Between the STX 550 A total price including on roads would be good. Thanks

Just did some of the paper work for the new 550 and it was a bit more than I expected. $68000 with on roads cost. They are not sure if there will be an ABN discount. I don't want to pay more than 61000. But its still on its way and I will sort out the details when its closer.

Just thought i would post this as i was looking on ebay and seen it DP POWER CHIP FOR SALE Model number DP31M2 Please visit dpchip.com for more information, and to see if this is the right model for your Navara. its Navara 2.5 CRD, Only fitted to car under 12 months still 4 years of warranty...

Scotty I have ordered one already just ring your dealer. To test drive one you will be waiting till late January 2011 as that when the first shipment of them come in i have been tolled. There are a few videos on youtub if you look and Nissans web site has heaps of info on them.

Just spoke to the dealer and he seams to know less than me about the new 550 but he did say that with the email that he had from Nissan that it is only the 7 speed auto. I will need to live with it. But it could be good driving in the peak hour traffic in Brisbane not changing gears non stop.