Recent content by jko488

Part way into changing from style side to tray, what are the QLD regs on how the tray is made to be compliant for insurance ect?

Monday mine fell off on the way to work, the sprag bearing crapped itself and just fell. Hopefully I'ii have it all back together sunday. Nearly upgraded to alt to a 130A instead of the 100A

I'm running a diesel smart module and dawes valve on mine, factory sensor goes to 21psi (via touque App) for a bit before it cuts fuel. running 29ish (Auber gauge) psi at the turbo. standard exhaust intake at this stage.

I have checked that also, checked voltages and continuity of the Clutch Brakes and Neutral switches while in operating position. Been busy with work and selling lights to get back to working out the problem with it. hopefully get a chance after the goondiwindi 400 to investigate further, The...

I think it got the speen reading from the abs sensors on the wheels?

I have tried all of that and nothing works. I've already replaced the neutral switch. Only code that comes up is the crank position sensor. But it's not all the time.

Last night I checked the clutch brake and neutral switches they all work as they should. One way I can get it to work is when driving shut the engine off with the clutch in restart and it'll engage. It'll stay engaged for around 150km or less. once it drops out it won't engage unless I shut...

Is there a way to do a system check on the cruise control system? Ever since i put the new clutch in is works every now and then. I have replaced the neutral switch and didn't work. When it is engaged everything works normal, all the switches buttons. when i do get it engaged it can stay on...

I forked the front up first. Good height to work on it with one of those small swivel seats. Stable as anything, even when I've being jumping around doing other jobs on it

I got the clutch out this morning. DMF is buggered so is the clutch plate. So be getting a SMF from yd25. Should I replace the rear main while its apart?

Hi all, long time reader, found nearly all the info I need by reading. I have a 09 stx 6sp yd25. tuesday morning i hoped in and the clutch work just, the pedal went about halfway and felt like it was bottoming out (very hard). but was able to get it into gear easy enough and drove without...

Ive got galaxy s3 never had a problem pairing to the obdll. I never had to put a password in. In touque under settings there is something change to over come the Samsung bluethooth issue

Finished it up today

Thought I'd post my mod of the sports bar for some hid's. Took the ladder rack bar off and put some 50mm angle in place. Not finished yet just needs a sand and some paint