Recent content by Mud Fish

Hi shorty how many k's on ya truck. I have never changed mine on my 02 because it always started well I pulled them out the other day because I have a cracked head so striping it down. Found 3 out of the 4 had broken the tips off so if ya k's are up there a visual inspection would not hurt

I agree with jased22 if you have longer hangers that will take care of any angle you have lost. money best spent elsewhere. I have 40mm efs 30mm diff block and 2" hangers been running that for four years with no problems still has original center bearing and it's 13 years old

OK I'll have a look into the cv with the four bearing the gsp cv I got are bigger in the bearing than the original ones. And I have just ordered the drop kit from profomance suspension with the drag link.

It would be just under 3" with snake racing uca

mine have been on there for 7 years now just starting to sag a little my snake racing hangers have worn to s--- after 4 years tho. the noise you hear could be coming from up by the front pin the last time i had mine off i could see where the the top of the spring hits the frame

Hi all its been a long time since i have been on here after having a couple of kids and moving across the island time has been short. so i thought i bta put up some info on the latest issue with my d22. on my last outing i ripped both of my inner cv boots i took the cv,s off to replace them and...

Hi i had been looking into putting a r200 in the front of my 02 zd30 d22. The vin plate said it was ca46 which didnt sound right and after a bit of info off of here i decided to pull the cover off the rear diff and it turns out its a ca43 so i recommend checking when ya change diff oils then you...

I put the falcon bar on my d22 had been looking around at diffrent brands for awhile and it was the best looking one but i was sold on the price. It came with the winch bracket and fitted perfect

iam not to sure on that mate someone will no on here. if i had the $$ i would go for reduction gears in the transfer case that way it,s still good on the highway. most of the r200 diffs i have seen seem to be 4.375 for the manual and 4.625 for the auto.higher the number the lower the gear is if...

so i took the cover off the rear diff today and it is 35:8 - 4.375 not 4.625 as the trans axle plate said. so thanks for your help

yip i have had them for 6 months found them great had efs previously and found them to hard. Also got the wireless controller works well.

Well thats good to no i better count the teeth then before i get the diff just to be safe. I have to replace a busted cv and put some new lower arm bushes in so i check it out then thanks for that

yip mine is the zd30 it use to run around 2500 /100kph with the stranded 265/70r16. looked into r200 swap a while ago so got a ruff idea what i have to do. There is plenty of vg33e terrano around here with the 4.625 ratio

I am looking at putting the r200a diff in my truck and was under the impression that the d22 zd30 had a 4.375 ratio but according to my vin plate i have a CA46 which is a 4.625 ratio which is good news because they are easy to find in that ratio. i am curious to what you guys have and what year...

how much oil should be getting into my intercooler i think the turbo is on the way out its starting to make a strange sound when i throttle off and theres a bit of play in the propeller. nissan nz quoted $2800nz for a new ht12-19b but reckons he can do it for $2000. tempted to leave it till it...