Search results

Lately i have been having gear shift troubles [ intermitant ] When the revs build and it should shift, it begins to shift, revs drop a little then it feels like its gone into limp mode, i can flatten it and no great response. Then if i take my foot off it completes the change, put my foot back...

Removed TD27 ETi , fitted, New QD32 engine, new mechanical IP [ 167002S622 ] , new turbo to suit QD32, [ GT2871 ] Could not find any info on timing the IP, eventually set it to 0.6 mm at TDC with a dial indicator, i believe that made it about 4 deg. BTDC. Starts VERY well , nice and smooth no...

Hi fitted an unknown new VE44 pump [ googled numbers , cant find anything ] to my QD32 I think ive got the timing somewhere near right, starts easy, just back from rattle. Went for a drive turbo only giving 3 or 4 psi and only getting a top speed of 100km on a streach EGT at the end of the...

Hi I was going to add an engine guard alert for both low oil pressure and high eng temp. [ 1996 ] Ponder ,ponder, wonder wonder, I do have an alert that beeps whenever i open the drivers door while the ign is off,,,,,,, so I already have the beeper [which is mounted just to the right and above...

Hi, there is a relay in the engine bay between the brake booster and the guard tucked away a little, clicks when i move the throttle TPS. Can anyone tell me what this does, Thanks David

Hi doing an engine swap, on fitting engine i found i had 2.7mm gap for the torque converter to slide forward against the flexplate. Info i could find said at least 3mm, I decided 2.7 was close enough. Started engine moved forwards and back in the shed a few times, all ok. Then with eng. not...

Hi Just fitted a QD32 turbo pump, bought from Alibarba onto a new QD32. I searched and seached the net for specific timing but found nothing. From info on other pumps i decided to time it at 0.6 with a dial indicator. Started it up, it sounds fine. Havnt got it hot yet as i havnt fitted radiator...

Just fitted mechanical pump along with extra electric lift pump. Any suggestions on an easy place to get 12v while ign is on , 96 Terrano Thanks David

Hi looked everywhere cant find torque setting for the 4 bolts that bolt the flexplate to the torque converter. on a TD27 Thanks David

Removed blown TD27 from a 96 , bought QD32 long brand new engine from Alibarba $3,500 all up to get it on my shed floor. So far so good. Everything should bolt straight over, starter, manifolds etc. OH HANG ON. My TD27 had a 6 bolt crankshaft and the new QD32 has a 7 bolt crankshaft, where the...

If I replace Electronic controlled injector pump with a mechanical pump what will happen to other electrics, will i lose the tacho ? , will the Auto box know when to change ? Td27 ETI 1996 Thanks David

Hi building QD32 I need a 7 bolt flexplate with a diameter of aprox 315mm From first findings the ZD30 has 7 bolt but has a larger diameter overall about 370mm Can anyone tell me do any of the QD32 7 bolt flexplates have a diameter of 315mm , or did they go to the larger ZD30 diameter when...

Ive had several episodes of " Limp mode" various sensors at various times and one three month session for no apparent reason. Its driven me krazy and after grizzeling to my wife about it and pointing out how many threads there were about it on the forums. She said, " well if its such a...

Hi swapping out a TD27 for a new Chinese QD32, most things just swap over. If anyone has a QD32 7 bolt flexplate [ auto flywheel ] please let me know, I want one. Also on the back RHS of the new QD32 sump there is a pipe sticking straight up to receive a flared fitting,. It seems to go all the...

Hi the car is actually a 96 Terrano Auto, im replacing the TD27 with a brand new Chinese QD32. Most of the info says move the gearbox back 3" but ive looked underneth and it appears the box [ transfer case ] will hit the fuel tank before its gone back 1", so im thinking maybe its better to drop...

I have a 96 2.7 ETi which has blown . I have bought a QD32 long block new from Alibarba cost $3600 all up. I have also bought a new Injector pump 16700-2S622 for QD32 with turbo diaphram { hope its the right one } cost around $1,000 Now I want to get away from electronic controls, fault codes...

Hi from dagwill, David from Lyndoch SA, 96 Terrano , 2004 GU Patrol.