2004 D22 Power mirror fitting

[Snt2010]

Hi I am fitting a set of power mirrors to my 2004 d22 as it was only fitted with standard mirrors. I have fitted the mirrors and found all the wires inside the doors and fitted the switch into door as well. What I need to know is how to get power to the wires in the fuse block. Can anyone help. Thanks Dave

 

[Mitchy]

I'm in the same boat, easiest way is just to loop a wire into the power and earth from the window switch to the mirror switch. But I don't want to do it the dodgy way would rather use the allocated fuse and find the power wire inside the cab. Have you had any luck Dave?

 

[Leighbus]

Does the allocated fuse have 12v going to it? If so you could use a fuse tap. I use them on all my accessory powered car gadgets. Or it could be plugged into any fuse wouldn't make any difference. Also these fit in nice and tight no chance of coming loose and falling out, I had to use pliers and force to remove it.

http://www.jaycar.com.au/productView.asp?ID=SF5115