Hey all, just finished installing my Brown Davis 3pce bashplates. Here is a pic...
http:// [URL=http://s1257.photobucket.com/user/10navst/media/Mobile%20Uploads/20140322_174409_zpszjpwoxp8.jpg.html] [/URL]
Just a quick word about them. Great kit, well built and heavy as all hell, assembly was fairly easy as they provided a good set of instructions with pics included. One snag I hit was the very last bolt on the 3rd pce that goes in through a hole in the tailshaft hoop crossmember thingy (not sure what it's called). Anyway, when you put the bolt in from the bottom up the nut sits mm's away from what seems to be fuel lines which run inside the tailshaft hoop crossmember thingy. What I ended up doing was using a shorter bolt I found in my shed and putting some rubber inbetween nut and line and wedged it in. All good. Now I can scratch them up over easter and let you all know how they faired.
Cheers.
http:// [URL=http://s1257.photobucket.com/user/10navst/media/Mobile%20Uploads/20140322_174409_zpszjpwoxp8.jpg.html] [/URL]
Just a quick word about them. Great kit, well built and heavy as all hell, assembly was fairly easy as they provided a good set of instructions with pics included. One snag I hit was the very last bolt on the 3rd pce that goes in through a hole in the tailshaft hoop crossmember thingy (not sure what it's called). Anyway, when you put the bolt in from the bottom up the nut sits mm's away from what seems to be fuel lines which run inside the tailshaft hoop crossmember thingy. What I ended up doing was using a shorter bolt I found in my shed and putting some rubber inbetween nut and line and wedged it in. All good. Now I can scratch them up over easter and let you all know how they faired.
Cheers.
Last edited: