Tom2021
Member
Hi everyone,
I discovered yesterday that neither of the brake lights were working on my 2012 ST-X (Spain built, Australian delivered). Replaced both bulbs, tested fuses with multimeter (they were fine but I replaced anyway just in case).
I then tested the brake switch, and had inconsistent readings (turned out to just be user error) so I pulled it apart and tested it and everything was fine.
I put it back in the car and tested it, has 12v going in and when the brake pedal is pressed it's 12v output. So switch is 100% fine.
I had a look under the car and couldn't see any clear frayed wires or anything, and all connections appear to be fine.
Is there anything else I should check before giving up and taking it to an auto electrician?
Any help is greatly appreciated.
I discovered yesterday that neither of the brake lights were working on my 2012 ST-X (Spain built, Australian delivered). Replaced both bulbs, tested fuses with multimeter (they were fine but I replaced anyway just in case).
I then tested the brake switch, and had inconsistent readings (turned out to just be user error) so I pulled it apart and tested it and everything was fine.
I put it back in the car and tested it, has 12v going in and when the brake pedal is pressed it's 12v output. So switch is 100% fine.
I had a look under the car and couldn't see any clear frayed wires or anything, and all connections appear to be fine.
Is there anything else I should check before giving up and taking it to an auto electrician?
Any help is greatly appreciated.