Search results

Thanks for all the replies people. After looking further into 1 of the websites 1 of them offers antiglare film, $15 for 10 pack. Might be worth a try.

Hi Guys Seriously thinking about putting on of the above units into my D22 and possibly my wifes Commodore. I drove a BT50 today that had a double din head unit installled and when driving it there were times I couldn't seehthe screen for glare from the sun, screen reacted the same as my...

Like you I've had most of the bits sitting under the bench for the last 12 months but been to busy to do anything about it..Last week got around to fitting the snorkel to the guard. Next step is the pipe from the snorkel to the engine bay to connect to the air box. I plan to do this with 2 x 90°...

I only use Bosch or Gates belts.Repco have their own branded belts at a good price but I have found in the past that their sizing is wrong and have to send them back.

Don't remember what they cost,got the wife to order them & never saw the invoice.Probably average $20 each at a guess but a cheap fix if thats all it is.Not to hard to do just the A/C belt is a bit of a pain as you have to take the stone tray off and do it from underneath.If you do replace the...

Mine had a similar noise to what you describe. Did it for 6 months and was worse in the cold winter mornings. At first I thought timing chain but at the time it only had 65,000km and the noise just didn't sound quite right to be chains. Adjusted the belts which changed the noise but it didn't go...

My 2 playthings,when I have time when I have time that is.

+1.

If you can hear the compressor spinning when operating the horn it might only need lubricating. The vanes in the pumps need lubrication so they don't stick. In the old days the good quality compressors had a cap on the top to occasionally put a few drops of sewing machine oil in. That compressor...

I'll start at the beginning. Did you take out the phillips head screws? A lot of the time rust holds the disc on. If replacing the discs get a hammer and belt the disc off from the back where the inner pad sits. If using the disc again use a block of wood between disc & hammer. If that doesn't...

I just had a 100 series turbo diesel in for a rego check and had a look at the air box.It wont fit,the inlet that connects the airbox to the snorkel is angled wrong and wont align with the hole in the inner guard of the D22.

Mate they're 2" wide x 1" high x 3"deep. Doubt that they will fit straight in the hole without enlarging it. Other problems I could see would be clear sight to these slots and if the hole was enlarged would the dash pad start to seperate because I think the dash is pastic welded around the seam...

Hi mate,I was sure they'll fit where iI want to put them,was mainly interested to hear feedback from those using them. Thanks to dilmah,I think I will go ahead with the Auber gauges. P.S sorry for jumping in on this thread.

http://www.auberins.com/index.php?main_page=index&cPath=5_26 Hi guys Long time reader but first time poster. This post has come at a good time as I've been tossing up options as well. Is anyone using Auber gauges and those of you who are what are you views on these gauges. If I go this option...