What Intercoolers have people installed on their ZD30's

[04SilverSTR]

Have you got some photos of how you fitted up your Subaru intercooler? And of where all the piping went?

Have a look here im my build thread http://www.navara.asia/showthread.php?t=10566&page=17

Cheers

 

[dtr19]

Notes I made for the install.
-reverse bottom radiator clamp.
-Bend wiring bracket to clear bottom pipe just near radiator hose
-G-clamp on radiator support panel to bend.
-Remove head light to help with install
-Cut back radiator plastic to clear top pipe
-bend radiator aluminium edge to increase clearance.
-silicon coupler with the raised bump goes near the radiator.
-bend power steering cooler pipes to clear mount bolt and align with feeder pipes.
-use off cut of bottom silicon pipe to brace vertical aluminium pipe with a hose clamp near the air box pre filter.

also note the horn needed to be relocated to the other side of the central radiator support bracket. (wiring needed to be extended)

 

[Mckenna2208]

They both look good!
What sort of hose did you both use?
Thinking I might just use the intercooler I have in my shed, even though it's fairly small

 

[loco12]

is that the factory bull bar mount that has a big hole cut in it?

 

[Jased22]

Iv been running forefronts big intercooler kit for over a year now. Never had any issues. Done heaps of 4wding with it. Best bang for buck intercooler kit by far

 

[vicszd30]

I've been running a Cross country intercooler for over a year now and every day I look out over that bonnet I'm reminded how hard I got fukced !

 

[Rumpig]

I've been running a Cross country intercooler for over a year now and every day I look out over that bonnet I'm reminded how hard I got fukced !

Make that quote your signature!

 

[vicszd30]

Make that quote your signature!

I think I will

The maggots they are..

 

[dtr19]

is that the factory bull bar mount that has a big hole cut in it?

Yes it is.