Search results

Hi im Chasing a diff side flange for my 2012 D22 nav its the r180a diff. Cheers

Well after thinking id done the CV in my 2012 d22 and buying a new one for $250, i got the bash plates off and CV out and realised its the diff side flange and the CV is fine, tried getting the flange out but the disc end has sheared off separate from the shaft and cant get the shaft out as it...

Hi Guys Before i started this i was searching for info and pics of someone who had done this before but there wasnt much out there, so for those who might be doing this in the future this is how I modded my front Ironman plate to fit around my recovery points and nissan bar. In these pics i...

The other week i was doing some pretty extreme stuff for a d22 and didnt even notice that broke what i believe to be a CV, lost power to the front wheels and upon inspection noticed the CV shaft is loose at the diff end on the passenger side, i unlocked my hubs and left in 2wd when i parked up...

Need to know Plug specs ..... Hi Im looking at getting sump plugs using neodymium type H magnets. I need to know the plugs sizes for my vehicle, i have a 2012 d22 thai build. I already have the sump size from a search on here which is apparently M12 X 1.25 , 10mm long. I just need the sizes...

Hi For those who are interested to join a page I made on facebook for WA D22 enthusiasts, search: D22 Navara Group, Western Australia Cheers

Hi Guys Im thinking i might go and install a catch can im looking at either one of these two... http://www.ebay.com.au/itm/ADD-W1-Black-Baffled-Universal-Aluminum-Oil-Catch-can-Reservoir-Tank-Ver-2-/141097569813?pt=Motors_Car_Truck_Parts_Accessories&hash=item20da120e15&_uhb=1...

Hi I'm wondering how hard it is to wire in a standard HKS type 0 turbo time?r which Is a pretty basic one just park brake switch, no rpm etc. There's a guy near me doing them for $160 fitted, or I could do it myself and pay around 40 for one off eBay , though I'm not sure if they are legit ones...

Hi Ive been reading a bit into bashplates for my thai built 2012 d22 with genuine nissan steel bar, from what i read all the bash plates wont just bolt straight on, they require some cutting etc to fit the plate thats on the bullbar. Does anyone know of any out there that will bolt straight...

Hi Does anyone know where to find pitbull rocker tyres in WA? I saw a set of these on a d22 and look unreal. Cheers

Hi Im not sure if you guys have seen these before, but its the first time ive seen anything like it, heres a link http://4x4concepts.com.au/shop/index.php?main_page=index&cPath=4 Its a great place to put some extra gauges and i will be getting this when i get a boost/EGT gauge for sure.

Hi Im looking for the bulb sizes for the reverse lamps, number plate lamp, map lamps and dome lamp for my 2012 d22 does anyone here know the correct size or codes for them ? Cheers

Hi Ive installed my pioneer avh x3500dab head unit today with reverse cam i have wired the HU reverse signal input to the reverse lights and the camera power to ACC, earth to the HU earth, the problem is when i choose to view the cam in AV mode no worries it works ok, but when i put it in...

Hi I was at the bowser today and nearly got some gull biodiesel but I wasn't sure if its ok with my engine, I have a 2012 d22 I have heard that bio diesel isn't good in CRD engines? I used to run it in my 86 hilux and it went well and usually save a few cents a liter at the bowser. So is it ok...

Hi I have tried to search for similar topics but to no avail. I bought a Pioneer DVD head unit (AVHX3500BT) with Pioneer RCAM2 reverse cam from JB hifi for $468. I will be installing it myself into my 2012 D22 Thai built, I was wondering where everyone else put their reverse camera, keeping in...

Hi Im looking for A wire to power my UHF and i want to put it under the passenger seat as i have a remote head unit model. I can see a thing that looks a bit like a relay with some wires can i tap into here to get the power? does anyone know what that is for? I have a 2012 d22.. Cheers

Hi With the 2012 D22 with yd25 When i do the EGR blank, i have read that i should install a dawes valve to protect my engine, is this true? Also do i have to fit a catch can? Will the EGR blank increase the need for the catch can? Cheers

Hi Im going to do the EGR mod and Im thinking instead of using a catch can and sending the gas back to the turbo can it be just routed away from the engine altogether via a breather? would this damage the engine? I know its not the best for the environment but is it possible or has anyone done...

Hi all About a year ago i stumbled across a page that had a comprehensive explanation of dieselchips and some reviews and prices of some of the brands and there used to be a lot of topics on various 4x4 pages linking to this write up. I have been searching for ages now and cant seem to find it1...

Hi Yesterday I took my 2012 d22 nav through a bog hole which was much deeper than I imagined (glad I got the snorkel and winch after all!). When I got out I noticed my central locking only unlocks the drivers door now and not all the others, would they repair this under warranty as I got it...